12 min read

Single Root I/O Virtualization (SR-IOV) -Pt 2- LynxOS-178 10G network benchmarkS

By Tim Loveless | Principal Solutions Architect on Mar 16, 2021 12:33:11 PM

_______________

Single Root I/O Virtualization (SR-IOV) virtualizes network interface cards (NICs) to allow a single NIC to present itself as dozens of virtual NICs to a hypervisor. It is a hardware standard, part of the PCI-SIG (Peripheral Component Interconnect - Special Interest Group) and is heavily used in data centers. It is a key software defined networking (SDN) component that allows data centers to efficiently host internet servers as virtual machines (VMs). SR-IOV provides a pool of hardware virtualized NICs that a cloud computing platform such as OpenStack dynamically assigns to VMs as they are launched. This infrastructure uses Linux orchestration platforms and mainly Linux based enterprise guest OSs.

In our first blog post on the topic (Part I), we saw that the Intel® Atom® C3858 (Denverton) Processor has 4 built-in X550 NICs that present 256 virtual NICs. LynxSecure was used to build a system with 5 Buildroot Linux guests, 4 of which used virtual SR-IOV NICS. This article (Part II), takes the next step and illustrates how to build a system with 3 LynxOS-178 RTOS guests and a Buildroot Linux. LynxSecure is used to assign 14 SR-IOV NICs to the guests before we run benchmarks to measure the overhead of SR-IOV virtual networking. These are high performance 10G bit/sec NICs, so the benchmarks are also an interesting comparison of Linux vs LynxOS-178 networking performance for UDP and TCP at various packet sizes.

Topics: Multicore Safety MCP embedded systems hardware development Single-root IO Virtualization hypervisors virtualization software certifications Virtual Machines 10G Benchmark